Aluminum Alloy Die-cast Radiator

Aluminum Alloy Die-cast Radiator
Details:
Aluminum alloy radiator die - casting is a manufacturing process that uses aluminum alloy materials. The molten aluminum alloy is filled into the mold through high - pressure injection and then cooled and solidified. The advantage of this process is that it can accurately shape complex radiator structures. At the same time, aluminum alloy has excellent thermal conductivity, which can quickly transfer heat and improve heat dissipation efficiency.
Send Inquiry
Description
Send Inquiry

Aluminum alloy radiator die - casting is a manufacturing process that uses aluminum alloy materials. The molten aluminum alloy is filled into the mold through high - pressure injection and then cooled and solidified. The advantage of this process is that it can accurately shape complex radiator structures. At the same time, aluminum alloy has excellent thermal conductivity, which can quickly transfer heat and improve heat dissipation efficiency.

 

 

Advantages of Die - casting Aluminum Alloy Radiators

 

Lightweight and sturdy

Die - cast aluminum alloy radiator products have the characteristic of light weight. They not only reduce the overall weight but also maintain sufficient structural strength, making them an ideal choice for electronic devices.

Excellent thermal conductivity

The thermal conductivity of aluminum alloy radiators is better than that of other materials. It can quickly transfer heat to the fins and accelerate the heat dissipation process, effectively ensuring the normal operation of the equipment.

High customization

The die - casting process of aluminum alloy radiators is flexible and diverse. It can be designed individually according to different equipment requirements to meet the heat dissipation requirements in different scenarios.

Energy - saving and environmental - friendly

Aluminum alloy radiators are recyclable and environmentally friendly materials. The manufacturing process reduces resource consumption, which is in line with the concept of modern energy - saving and environmental - protection.

 

 

The process of die - casting for aluminum alloy radiators

 

 

Mold Design and Manufacturing
Design a reasonable die - casting mold according to the structural characteristics and performance requirements of the aluminum alloy radiator. The mold should consider factors such as the parting surface, gate, overflow tank, and cooling system to ensure that the aluminum alloy liquid can evenly fill the cavity and achieve good heat - dissipation performance. - Manufacture a high - precision die - casting mold through processes such as machining and electrical discharge machining. The mold material is usually a high - hardness, high - strength alloy steel with good thermal fatigue performance.

 

Raw Material Preparation
Select appropriate aluminum alloy materials. Commonly used aluminum alloy grades include 6061, 6082, A380, ADC-12 etc. These aluminum alloys have good thermal conductivity, corrosion resistance, and casting properties. - Heat the aluminum alloy ingots to a molten state. The melting temperature is generally between 650 - 750℃. To ensure the quality of the aluminum alloy liquid, processes such as refining, degassing, and slag - removal are required to remove impurities and gases in the aluminum alloy liquid and improve the purity of the aluminum alloy.

 

Die - casting Molding
Pour the molten aluminum alloy liquid into the injection chamber of the die - casting machine. - The injection mechanism of the die - casting machine injects the aluminum alloy liquid into the mold cavity at a high speed under high pressure, filling the entire cavity in a short time. The injection pressure is usually between 50 - 150MPa, and the injection speed is 3 - 10m/s. - The aluminum alloy liquid rapidly cools and solidifies in the mold cavity to form the blank of the aluminum alloy radiator. During the cooling process, the cooling system of the mold cools the mold to control the cooling rate and ensure the quality and performance of the casting.

 

Demolding and Cleaning

When the blank of the aluminum alloy radiator cools to a certain temperature, the die - casting mold opens, and the blank is ejected from the mold cavity through the ejection mechanism. - Remove burrs, flash, gates, overflow tanks, and other excess parts on the surface of the blank. Methods such as manual grinding and mechanical deburring can be used. At the same time, clean the blank to remove surface oil stains, impurities, etc., for subsequent processing.

 

Subsequent Processing

According to the product requirements, further process the blank of the aluminum alloy radiator, such as drilling, tapping, milling, etc., to meet the assembly requirements of the radiator with other components. - To improve the corrosion resistance and appearance quality of the aluminum alloy radiator, surface treatment is usually carried out, such as anodizing, electroplating, spraying, etc. Surface treatment can not only enhance the aesthetics of the radiator but also improve its heat - dissipation performance and service life.

 

Quality Inspection

Use methods such as visual inspection, dimensional measurement, hardness testing, and metallographic analysis to conduct quality inspection on the aluminum alloy radiator. Check whether there are defects such as pores, shrinkage porosity, and cracks, and whether the dimensional accuracy, hardness, and metallographic structure meet the product standards and requirements. - Test the heat - dissipation performance of the radiator. By simulating actual working conditions, measure the heat - dissipation efficiency and temperature distribution of the radiator to ensure that the radiator meets the designed heat - dissipation performance indicators. Through the above process flow, the die - casting process for aluminum alloy radiators can produce aluminum alloy radiator products with complex structures, good heat - dissipation performance, and high quality, meeting the needs of different fields for heat - dissipation equipment.

 

 

Aluminum alloy die-cast radiator specification

 

Mold Material

SKD61, H13

Cavity

Single or multiple

Mold Life Time

50K times

Product Material

1) ADC10, ADC12, A360, A380, A413, A356, LM20, LM24
2) Zinc alloy 3#, 5#, 8#

Surface Treatment

1) Polish, powder coating, lacquer coating, e-coating, sand blast, shot blast, anodine
2) Polish + zinc plating/chrome plating/pearl chrome plating/nickel plating/copper plating

Size

1) According to customers' drawings
2) According to customers' samples

Drawing Format

step, dwg, igs, pdf

Certificates

ISO 9001:2015 & IATF 16949

Payment Term

T/T, L/C, Trade Assurance

 

 

Our die-casting and CNC machine equipment list

 

Equipment Name

Specification

Quantity

Unit

Purpose

Brand

Remarks

Cold Die Casting Machine

280T

3

Set

Die Casting

LK

Full-

automatic

Cold Die Casting Machine

630T

1

Set

Die Casting

LK

Full-

automatic

Hot Die Casting Machine

88T

1

Set

Die Casting

LK

Full-

automatic

Hot Die Casting Machine

128T

2

Set

Die Casting

LK

Full-

automatic

Hot Die Casting Machine

168T

1

Set

Die Casting

LK

Full-

automatic

850 Machining Center

 

10

Set

CNC 5 - axis

Mazak

Full-

automatic

650 Drilling and Tapping Machine

 

16

Set

CNC 5 - axis

Mazak

Full-

automatic

650 Drilling and Tapping Machine

 

10

Set

CNC 4 - axis

Mazak

Full-

automatic

46 CNC Lathe

 

10

Set

Lathe

Mazak

Full-

automatic

 

 

Why choose us

 

One-stop Solution
From mold design, mold making, machining, fabrication, welding, surface treatment, assembly, packing to shipping


Quality Guarantee
We have a professional team to control the quality. Experienced engineers, precision machines, CMM and closed-loop QC system


Customer Service
Every client is served by a specialized sales for timely technical support and after-sales service

Hot Tags: aluminum alloy die-cast radiator, China aluminum alloy die-cast radiator manufacturers, suppliers, factory, Aluminum Alloy Die cast Electrical Case, Aluminum Alloy Electronic Enclosures, Aluminum Alloy Die Casting Heatsink, Aluminum Alloy Die Cast ADC 12 Ashtray, Aluminum Alloy Radiator Housing, Aluminum Alloy Die casting Wheel Hub

Send Inquiry