Aluminum Alloy Die-cast Engine Parts

Aluminum Alloy Die-cast Engine Parts
Details:
Material: Aluminum Alloy A356
Standard: According to Client's Drawing
Application: Automotive Customization
Surface: Sand Blasting, Polishing, Anodizing, Painting ,Powder Coating, rubber coating.
Send Inquiry
Description
Send Inquiry
 

Product Specification

 

Material

Aluminum Alloy A356

Standard

According to Client's Drawing

Application

Automotive Customization

Surface

Sand Blasting, Polishing, Anodizing, Painting ,Powder Coating, rubber coating.

Tolerance

Per client's drawing.

Service

Customized Die Casting Manufacturing

Drawing Format

2D(PDF/AUTO CAD) 3D(IGES/STEP)

Lead Time

Mold: 25-35. Mass productin: 20-30 days.

Certification

ISO9001-2015, ISO14001-2015, ISO45001-2018;

QC Inspection

100%

 

Aluminum alloy has the advantages of casting, stretching, high acid and alkali resistance, and low weight. The engine cylinder block is a core component of a vehicle, and most of its materials are aluminum alloy. How to improve the mechanical properties of the aluminum alloy cylinder block has become an urgent problem to be solved. Taking A356 aluminum alloy as the research object, by adding different contents and sequences of Si and Mg elements, and conducting multiple processes such as grain refinement, grain structure destruction, and alloy grain combination for die-cast parts, the material characteristics of the Mg and Si contents in A356 aluminum alloy in the die-casting process were studied. The conclusion confirmed that when the Si content index in the A356 aluminum alloy material is 7.2% and the Mg content index is 0.45%, the end-face elongation and cross-sectional tensile strength are in the best state. The corresponding end-face elongation and cross-sectional tensile strength are 13.6% and 9.88%, 230 Mpa and 219 Mpa.

 

 

Characteristics of Die - casting Process

 

The production method of die - cast aluminum alloy cylinders is commonly used both at home and abroad nowadays. Its unique advantages include short technological steps, which require making molds in advance. The cylinder block rough castings are quickly taken out from the poured molds, processed, and the flash or burrs are removed. After passing the inspection, they are stored in the warehouse. It has a high degree of automation, strong process stability and operability, including for complex thin - walled castings. It has high - standard casting products, high - precision dimensions, and meets the surface roughness requirements. It also occupies a small space. The disadvantages are that the price of the supporting equipment for die - casting cylinder blocks is relatively high, and the demand for small - batch production cannot be guaranteed. Most die - casting molds are metal molds, with high design and manufacturing costs and a long cycle. In order to ensure demolding and core - pulling operations, it greatly restricts the structural or shape requirements of the cylinder block during die - casting. In most cases, heat treatment cannot be used to improve or enhance the mechanical properties of die - cast aluminum alloy cylinder blocks. Generally, die - cast aluminum cylinder blocks need to increase the volume or wall thickness of the die - casting mold to meet the requirements of mechanical properties. High - speed jets are used in die - casting, which will lead to high gas content and many internal pores in the cylinder block castings due to turbulent flow entrainment.

 

 

Principle of die casting process

 

The casting method using pressure molding involves injecting semi - solid or fully liquid molten metal into the cavity of the casting mold. The punch for injection quickly presses the molten metal downward, and the molten metal is rapidly filled into the cavity. The molten metal crystallizes and solidifies rapidly under the huge punching pressure, thus obtaining the casting. [6] During die - casting, the pressure acting on the molten metal usually ranges from 5 MPa to 70 MPa, and sometimes the pressure acting on the molten metal can be as high as 600 MPa. After the cavity of the die - casting mold is filled, a linear velocity of 0.5 - 70 m/s appears at the gate. The filling time is extremely short, generally 0.01 - 0.03 s. Domestic and foreign scholars have studied the die - casting process parameters shown in below table 1 in order to obtain a cylinder block with precise internal structure and no external defects.

 

1. Temperature parameters

 

Parameter name

Control requirements

Influence mechanism

Melt temperature

Aluminum alloy: 620 - 720℃
Zinc alloy: 400 - 450℃

Liquidity, shrinkage rate, mold heat load

Mold temperature

150-300℃

Affect the solidification rate and surface quality (special mold temperature controller is required for control)

Cylinder temperature

20 - 50℃ lower than the melt temperature

Prevent inhaling and rolling air

 

2. Pressure parameters

Typical pressure curve of high-pressure die casting (HPDC):

Slow injection stage

0.1 - 0.5 MPa

 

Fast injection stage

30 - 150 MPa

 

Pressure boosting stage

10 - 20% higher than the fast injection pressure

 

 

3. Speed parameters

 

Stage Speed

Range Control

Key Points

Slow injection speed

0.1-0.5 m/s

Prevent melt gas entrainment

Fast injection speed

2-6 m/s

Ensure that the mold cavity is completely filled (PID precise control is required)

Punch acceleration

5-15 m/s²

Influence the fluid state of metals

 

4. Time parameters (precision control elements)
1

Molding closing time

500 - 2000ms,

2

Injection time

20 - 100ms, # For thin - walled parts, it needs to be < 50ms

3

Pressure - holding time

100 - 500ms,

4

Cooling time

Calculated as 1s/mm wall thickness

 

5. Mold parameters
 
 

Exhaust system

The depth of the exhaust groove is 0.10 - 0.15mm (EDM processing is required).

 
 
 

Runner system

The speed of the inner gate is 30 - 60 m/s (optimized through mold flow analysis).

 
 
 

Surface treatment

Regular TD treatment is required (the lifespan of the mold steel is increased by 3 - 5 times).

 

 

6. Process Window Control

Qualified process window requirements:

 

Pressure fluctuation <±2%
Temperature deviation <±5℃
Speed repeatability accuracy <±0.05m/s

 

 

FAQ

 

Q: Are you a trading company or a manufacturer?

A: We have our own factories and companies in Shenzhen and Dongguan, and we are approaching to be a top-level mechanical supplying group company.

Q: How about the lead time?

A: Mold manufacturing: 3-5 weeks
Mass production: 3-4 weeks

Q: What kind of production service do you provide?

A: Molds making, die casting manufacturing, CNC machining, injection molding, powder metallurgy.

Q: How long can I get any samples?

A: 1 week according to the part's drawing design.

Q: How about your certificates and quality control?

A: - We have ISO9001:2008 certificates.
- We design and make molds in-house.
- We make 100% inspecting the products before shipments.
- Transactions can be through Alibaba's trade assurance.

Q: What is your MOQ?

A: According to drawings design, we accept 1 piece trial order.

Hot Tags: aluminum alloy die-cast engine parts, China aluminum alloy die-cast engine parts manufacturers, suppliers, factory, Aluminum Alloy Radiator Housing, Aluminum Alloy Die cast Electrical Case, Aluminum Alloy Die Casting Motorcycle Accessories, Aluminum Alloy Automobile Frame Accessories, Aluminum Alloy Die Casting Electronic Housing, Aluminum Die Casting Ashtray

Send Inquiry