Composition Of Injection Molding Accessories

Jan 20, 2025

Leave a message

The composition of injection molds mainly includes the following parts:

Molding parts: These parts include fixed mold cavity, movable mold cavity and core, which directly contact the plastic and form the product. The fixed mold cavity (concave mold) mainly forms the external shape of the plastic part, the movable mold cavity (convex mold) mainly forms the internal shape of the plastic part, and the core is used to form mold holes and special shapes.

‌Gating system: The gating system consists of main runners, branch runners, gates and cold wells. Its function is to fill the molten plastic into the mold cavity and transmit the injection pressure.

‌Guide positioning mechanism: Guide components such as guide pins and guide sleeves ensure that the movable mold and the fixed mold can be accurately aligned when closed. Some molds also have guide components on the ejector plate to ensure that the demoulding mechanism moves smoothly and reliably.

‌Demolding mechanism: The demoulding mechanism includes ejector pins, ejector tubes, ejector plates and pneumatic ejectors, which are used to eject plastic parts from the mold. Common demoulding mechanism parts include ejector pins, reset pins, slingshots, ejector pin fixing plates, etc.

‌Cooling and heating systems‌: Cooling and heating systems (such as cooling water, hot water, hot oil and electric heating systems, etc.) are used to adjust the mold temperature to ensure the quality of plastic parts.

‌Side-parting core-pulling mechanism‌: For plastic parts with side holes or side recesses, the side-parting core-pulling mechanism is used to perform side-parting core pulling or separate the slider before demoulding for smooth demoulding.

‌Exhaust system‌: The exhaust system exhausts the gas in the mold cavity by opening an exhaust groove at the mold parting surface or in the gap between the ejector and other moving parts to ensure the molding quality of the plastic parts.

‌Support and fixing parts‌: These parts include fixing plates, movable/fixed templates, support heads, support plates and connecting screws, etc., which are used to fix and support other parts.

Send Inquiry