Material Performance Advantages
High Precision Castability
- Zinc alloy has a melting point of 380–420℃, with excellent fluidity (about 1.5 times that of aluminum). This makes it ideal for die-casting complex thin-walled parts (such as tap internal waterways and intricate decorative elements), capable of achieving surface detail resolutions up to 0.2mm.
- Enables near-net-shape forming, reducing post-machining requirements (cost savings of ~30% compared to copper alloys).
Superior Surface Treatment Compatibility
- Strong electroplating adhesion (passing ISO 4520 testing), with common processes including:
- Multi-layer nickel-chrome plating (≥8 layers, salt spray resistance ≥96 hours)
- PVD coating (titanium gold, rose gold, etc., hardness ≥HV800)
- Can be polished to Ra ≤ 0.05μm (mirror finish) or textured through brushing, sandblasting, etc.
Comprehensive Mechanical Properties
- Tensile strength: 250–350 MPa (comparable to mild steel)
- Hardness: 80–100 HB (sufficient for frequent bathroom fixture use)
- Elastic modulus: 90 GPa, with vibration damping superior to copper alloys.
Cost and Production Efficiency Advantages
|
Parameter |
Zinc Alloy |
Brass (HPb59-1) |
Stainless Steel (304) |
|
Material Cost (¥/kg) |
20–30 |
40–50 |
25–35 |
|
Casting Energy (kWh/kg) |
0.8–1.2 |
1.5–2.0 |
Requires machining |
|
Mold Lifespan (k shots) |
50–100 |
30–50 |
N/A |
- Cost Benefits:
- Single faucet body costs ~40% less than copper castings.
- Die-casting cycle of 15–30 seconds, enabling high-volume production (daily output up to 10,000 units).
Advantages for Bathroom Applications
Corrosion Resistance in Humid Environments
- ASTM B117 salt spray test results:
- With coatings: ≥200 hours without red rust (equal to brass standards).
- Without coatings: Natural oxidation forms a dense ZnCO₃ protective layer (suitable for non-contact areas).
- No significant corrosion when exposed to slightly alkaline water (pH 7–9).
Lightweight Design
- Density of only **6.4 g/cm³** (72% of copper), reducing fixture weight and installation stress.
Environmental Compliance
- Meets EN 12150 (Pb < 0.1%), REACH regulations.
- Scrap recycling rate ≥95%, with remelting energy consumption only 5% of primary zinc production.
Typical Applications
Mid-to-High-End Faucet Bodies
Uses ZA8 zinc alloy (8% Al), CNC-machined sealing surfaces, meeting GB/T 18145-2014 leakage standards.
Functional Components
Diverters, handle bases, etc., leveraging zinc alloy's vibration damping to reduce water hammer noise.
Decorative Elements
Antique chrome, black nickel finishes at 60% of copper alloy costs.
Who we are?

BSH was established in 2015. Our company located in Songgang Town, Baoan district, Shenzhen, China.We are mold designer,provide additional services ( CNC machining, MIM ,Injection,die casting ,polishing, deburring, sanding, drilling, tapping and so on ) To meet our customer's specifications. We also supply all kinds of surface treatment(painting, anodizing, power coating ,sand blast, chrome plating etc.).Now the factory is with 5000 square meter, company total assets is 15 million RMB ,and a staff of nearly 150 members and workers, among which there are 12 engineers and over 50 senior technicians, who can make 3D designing and technical drawings with CAD/CAM/CAE according to our customers' requirements , and use CNC Processing Center, EDM center, 3-coordinate measurer, NC imitating milling machine, large precision EDM, high-speed milling machines, spot machine, wiring machine and so on.
Our die-casting and CNC machine equipment list
|
Equipment Name |
Specification |
Quantity |
Unit |
Purpose |
Brand |
Remarks |
|
Cold Die Casting Machine |
280T |
3 |
Set |
Die Casting |
LK |
Full- automatic |
|
Cold Die Casting Machine |
630T |
1 |
Set |
Die Casting |
LK |
Full- automatic |
|
Hot Die Casting Machine |
88T |
1 |
Set |
Die Casting |
LK |
Full- automatic |
|
Hot Die Casting Machine |
128T |
2 |
Set |
Die Casting |
LK |
Full- automatic |
|
Hot Die Casting Machine |
168T |
1 |
Set |
Die Casting |
LK |
Full- automatic |
|
850 Machining Center |
10 |
Set |
CNC 5 - axis |
Mazak |
Full- automatic |
|
|
650 Drilling and Tapping Machine |
16 |
Set |
CNC 5 - axis |
Mazak |
Full- automatic |
|
|
650 Drilling and Tapping Machine |
10 |
Set |
CNC 4 - axis |
Mazak |
Full- automatic |
|
|
46 CNC Lathe |
10 |
Set |
Lathe |
Mazak |
Full- automatic |
FAQ
Hot Tags: zinc alloy bathroom parts, China zinc alloy bathroom parts manufacturers, suppliers, factory, Zinc Alloy Decorations, Zinc Alloy Die Casting Handle, Zinc Alloy Die Cast Decorative Accessories, Zinc Alloy Bathroom Parts, zinc alloy die casting
